Advertisement
Engine
•
Position the clutch hub.
•
Fit the clutch-side cover.
•
Check that the measurement has not
changed compared with the one car-
ried out upon removal; tighten the
clutch nut afterwards. If the projection
has changed, rotate the crankshaft to
correctly engage the engine oil pump
drive gear on the clutch housing with
the oil pump driven gear.
•
Fit the washer and a new clutch hub
nut.
•
Tighten the clutch hub nut using the
specific tool.
Specific tooling
9100896 Clutch housing locking tool
•
Tighten the nut and proceed to caulk.
CAUTION
BE CAREFUL WITH THE CUPPED RING FITTING SIDE;
THE RING CONE SHALL BE DIRECTED TOWARDS THE
ENGINE.
ENG - 238
CAPONORD 1200
Advertisement
