Advertisement
Engine from vehicle
•
Working on the right side, insert the
three bolts with their washers.
•
Working on the right side, place the
spacers on the three bolts between the
engine block and the chassis.
CAUTION
THE SPACERS HAVE DIFFERENT SIZES. REFIT THEM IN
THE SAME WAY THEY WERE BEFORE BEING REMOVED.
•
Working from the left side, tighten the
three nuts.
•
Release the engine from the belt and
the hoist.
•
Refit the pinion and restore the gearing
chain clearance.
•
Reconnect the electric connections
and clamp the cable harnesses.
•
Carry out the vehicle preparation oper-
ations but in reverse order, restore the
correct level of all fluids and carry out
the adjustments that may be required.
ENG VE - 208
CAPONORD 1200
Advertisement
