Advertisement
CAPONORD 1200
Assembling
•
Grease the lower and upper bearing
rollers
•
Prefit the shim, dust gaiter and lower
bearing on the steering yoke as shown
in the figure.
Recommended products
AGIP MP GREASE Grease for bearings, joints,
couplings and linkages
As an alternative to the recommended product,
use top brand grease for roller bearings with an
operating temperature range of -22°F to +284°F
(-30°C to +140°C), drop point between 302ºF to
446°F (150°C to 230°C), high corrosion protection
qualities and good water and rust resistance.
•
Install the upper bearing on the steer-
ing yoke pin as shown in the figure,
with the conical part facing downward.
•
After inserting, the bearing must slide
freely on the steering pin till matching
with the steering bearing conic in the
frame.
•
Ensure the bearing mating in its seat,
using a teflon buffer from a suitable di-
ameter.
Suspensions
SUSP - 327
Advertisement
