Advertisement
Suspensions
•
Pour part of the fork oil into the sleeve.
•
Wait some minutes until the oil fills all the ducts.
•
Pour the remaining oil.
•
Pump out oil a few times.
•
Measure the air gap between the oil level and the rim.
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER TO MEASURE THE CORRECT OIL
LEVEL. THE OIL LEVEL MUST BE THE SAME IN BOTH STANCHIONS.
Specific tooling
AP8140149 Protection for fitting operations
Oil level: 135 mm (5.31 in) (from the sleeve
edge, without a spring and with preload pipe).
Characteristic
Fork oil (check also the correct air level in the
stem)
441 cm³ (26.91 cu.in) (for each stanchion)
ADD Version
Oil level LH stem: 130±2mm (5.12±0.08 in)
(from sleeve rim, without spacer spring and to-
tal cap).
Oil level RH stem: 120±2mm (4.72±0.08 in)
(from sleeve rim, without spacer spring and to-
tal cap).
Characteristic
Fork oil LH stem
119±5 cm³ (7.26±0.30 cu in) (Fork oil)
Fork oil RH stem
449±5 cm³ (27.40±0.30 cu in) (Fork oil)
SUSP - 322
CAPONORD 1200
Advertisement
