Advertisement
Engine
Installing the flywheel
•
Insert the woodruff key on the crank-
shaft.
•
Insert the start-up transmission gear
after applying a layer of grease.
•
Insert the flywheel on the crankshaft.
•
Screw the screw together with the
washer but without tightening.
•
Place the appropriate tool for locking
the flywheel.
•
Locking the flywheel in position, using
the specific tool, tighten the screw on
the crankshaft.
WARNING!:
TO APPLY THE CORRECT TIGHTENING TOR-
QUE, CHECK THE MEASUREMENT OF THE
SCREW THAT MAY BE M12 OR M14.
•
Remove the special tool.
ENG - 226
CAPONORD 1200
Advertisement
