Suspensions
•
Unscrew and remove the U-bolt four
fixing screws.
•
Remove the U-bolt.
•
Remove the handlebar and place it
paying attention that oil in the clutch
and front brake tanks does not spill out.
•
Unscrew and remove the upper plug
from steering yoke pin and collect the
washer.
•
Operating from both sides, loosen the
screws fixing the stanchions to the up-
per plate.
•
Undo and remove the two screws fixing
the instrument panel support to the fork
upper plate.
•
Slide off the fork upper plate by moving it towards the instrument panel.
SUSP - 324
CAPONORD 1200