Advertisement
CAPONORD 1200
COMPLETE H2O PUMP REMOVAL
•
Remove the clutch cover.
•
Unscrew and remove the three H2O
pump fixing screws.
•
Remove the H2O pump and slide off
the drive chain.
NOTE
REPLACE THE O-RINGS ON REASSEMBLY
Removing the radiator
•
Remove the fuel tank.
•
Slide out the connection pin with oil ra-
diator.
•
Drain the fluid from the system.
•
Slacken the clamp on the left side.
•
Slide off the pipe from the thermostatic
valve.
See also
Fuel tank
Cooling system
COOL SYS - 385
Advertisement
