CAPONORD 1200
•
Unscrew and remove the cap to drain
out the engine oil.
•
Unscrew and remove the engine oil fil-
ter.
•
Fit a new engine oil filter.
•
Add engine oil up to the correct level.
•
Start the engine, wait some seconds,
then stop the engine and check the oil
level again. Top up and set the level if
necessary.
Air filter
•
Remove the fuel tank.
•
Unscrew and remove the ten screws.
•
Remove the filter box cover.
COVER THE INTAKE DUCTS WITH A CLEAN CLOTH SO
THAT FOREIGN BODIES DO NOT GET INTO THE INLET
DUCTS. UPON REFITTING AND BEFORE PLACING THE
FILTER BOX COVER, MAKE SURE NEITHER THE CLOTH
NOR ANY OTHER OBJECT HAS BEEN LEFT INSIDE THE
FILTER BOX. MAKE SURE THE FILTERING ELEMENT IS
CORRECTLY PLACED SO THAT UNFILTERED AIR DOES
NOT FLOW IN. DO NOT FORGET THAT EARLY WEAR OF
THE PISTON RINGS AND THE CYLINDER CAN BE
CAUSED BY A MALFUNCTIONING OR MISPLACED FIL-
TERING ELEMENT.
Maintenance
MAIN - 69
Need help?
Do you have a question about the CAPONORD 1200 and is the answer not in the manual?