Maintenance
See also
Fuel tank
•
Check the gap between the electrodes with a feeler gauge.
CAUTION
DO NOT ATTEMPT TO READJUST THE ELECTRODE GAP.
The gap between the electrodes should be 0.6 -
0.7 mm (0.023 - 0.027 in) Wear limit is achieved
when the gap for one of the two electrodes rea-
ches 1.0 mm (0.039 in)
•
Make sure the washer is in good con-
ditions.
Installation:
•
Once the washer is fitted, screw the
spark plug carefully to avoid damaging
the thread.
•
Screw the spark plug to the prescribed
torque.
CAUTION
TIGHTEN THE SPARK PLUG CORRECTLY, OTHERWISE
THE ENGINE MAY OVERHEAT AND GET IRRETRIEVABLE
DAMAGED. USE ONLY THE RECOMMENDED TYPE OF
SPARK PLUG, OTHERWISE, THE ENGINE DURATION AND
PERFORMANCE COULD BE COMPROMISED.
See also
Engine
MAIN - 66
CAPONORD 1200
Need help?
Do you have a question about the CAPONORD 1200 and is the answer not in the manual?