Initial Configuration; Factory Default Configuration - Cisco IC3000 Hardware Installation Manual

Initial Configuration

This chapter describes the Out-Of-Box experience (OBE) for the installer that provides the device with a basic
working configuration. There is a factory default set of parameters that are available on the Cisco IC3000.
•
Initial Configuration
This chapter describes the Out-Of-Box experience (OBE) for the installer that provides the device with a basic
working configuration. There is a factory default set of parameters that are available on the Cisco IC3000.

Factory Default Configuration

The IC3000 has a factory default configuration that includes:
• Cisco IoT Field Network Director (FND) version 4.3 installed for configuration, firmware upgrade,
• Cisco IOx applications and services.
• IoT Gateway Management Agent (IGMA) for management in conjunction with FND.
• Platform Services manage the system initialization. This includes creating a signed image, enabling
IoT Field Network Director (FND)
IoT Field Network Director (IoT FND) is a software platform that helps to enable a clear separation between
communications network management and operational applications such as distribution management systems,
outage management systems, and meter data management in utilities. Use the software to manage a multi-service
network of routers or a combination of routers and endpoint devices deployed with end-to-end security for
your specific use case.
Connect the IC3000 to a laptop on the same network. When the IC3000 is powered up, the service bridge
interface which the management port (mgmt0) is attached to sends out DHCP requests. After it obtains an IP
address and FND access information (option 43) from the DHCP server, IDA (aka IGMA) will connect to
FND, which will then push the device configurations.
Initial Configuration, on page 31
periodic inventory and metrics collection, and status monitoring.
Linux kernel support, enabling utilities support, and enabling diagnostics and troubleshooting.
C H A P T E R
Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide
5
31