Secure Settings - Xerox DocuCentre SC2020 User Manual

Values:
0 m
1000 m
2000 m
3000 m
4000 m
5000 m
Clear Job History
Purpose: To clear the job history of all finished jobs.
Adjust TouchScreen
Purpose: To calibrate the control panel.

Secure Settings

Use the [Secure Settings] menu to set a passcode to limit access to the menus. This prevents items from
being changed accidentally.
Note: Bold values are the factory default menu settings.
Panel Lock
Purpose: To set a limited access to [Admin Settings] with a passcode, and to set or change the passcode.
Note: For more information, refer to
Values:
Panel Lock Set
*
Change Passcode
This item is available only when [Panel Lock Set] is set to [Enable].
Service Lock
Note: Service Lock feature is available only when [Panel Lock Set] is set to [Enable]. For more
information, refer to
Purpose: To specify whether to enable or disable each of the device services, or to require a passcode to use
the services.
Sets the altitude of the location where the device is
installed.
Executing Calibration
Disable
Enable
0000–9999
Limiting Access to Copy, Fax, and Scan
on page 214.
Disables passcode protection for [Admin Settings].
Enables passcode protection for [Admin Settings].
Sets or changes the passcode required to access
[Admin Settings].
on page 220.
® ®
Xerox DocuCentre SC2020
User Guide
Tools
188