Output Settings - Xerox DocuCentre SC2020 User Manual

Tools
Values:
Off
On

Output Settings

Purpose: To configure settings concerning output from the device.
Default Paper Size
Purpose: To specify the default paper size.
Values:
*
A4
*
8.5 x 11
* The default for [Default Paper Size] varies depending on region-specific factory default.
Print ID
Purpose: To specify a location where the user ID is printed.
Values:
Off
Top Left
Top Right
Bottom Left
Bottom Right
Note: When you print on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose: To specify whether the device outputs PDL data, which is not supported by the device, as text
when the device receives it. Text data is printed on A4 or Letter size paper.
181 ®
Xerox DocuCentre
User Guide
Disables the fault time-out.
60 sec Sets the amount of time the device
waits before canceling a job that stops
3–300 sec
abnormally.
Does not print the user ID.
Prints the user ID on the top left of the page.
Prints the user ID on the top right of the page.
Prints the user ID on the bottom left of the page.
Prints the user ID on the bottom right of the page.
®
SC2020