Xerox DocuCentre SC2020 User Manual page 52

Product Overview
No. Component
3 <Redial/Pause> button
4 <Clear All> button
5 <Power Saver> button
6 <Stop> button
7 <Start> button
8 <Error> LED
9 <Data> LED
10 <C> (Clear) button
11 <Machine Status> button
12 <Job Status> button
13 <Services Home> button
49 ®
Xerox DocuCentre
User Guide
Function
Press this button to re-dial a fax number.
Press this button to insert a pause between numbers when
entering a recipient's number.
Press this button to reset the displayed settings of each feature to
default values or clear the entered numbers. The setting is
returned to the same condition as the device is powered on.
Lights up when the device enters Power Saver mode to conserve
power when the device is left idle for a while. You can also press
this button to enter or exit Power Saver mode.
Press this button to cancel a current job or failed job.
Press this button to start scanning documents or confirm the value
of each setting.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error
occurs with the device, including paper jams and running out of
paper.
Blinks when the device is sending or receiving data to or from a
client. This indicator lights up when data is stored in the device's
memory or when the device receives faxes waiting to be printed.
Press this button to delete one numerical value that you have
entered.
Press this button to print reports and check the device information
such as the status of consumables and the device IP address.
Press this button to check/cancel a current job or pending job.
Press this button to display the Services Home screen.
®
SC2020