Xerox DocuCentre SC2020 User Manual page 175

Values:
Number of Redial
Redial Interval
Interval Timer
Dial Type
Purpose: To select the dialing type.
Values:
PB
DP (10PPS)
DP (20PPS)
Prefix Dial
Purpose: To select whether to set a prefix dial number.
Values:
Off
On
Fax Cover Page
Purpose: To set whether to attach a cover page to faxes.
Values:
Off
On
3
0–9
1
1–15
8
3–255
Uses tone dialing.
Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.
-
-
Prefix Dial Number
Does not attach a cover page to faxes.
Attaches a cover page to faxes.
Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the
device will not redial. The value is set in increments of
1.
Sets the interval between redial attempts. The value is
set in increments of 1 minute.
Sets the interval between re-send attempts. The value
is set in increments of 1 second.
Does not set a prefix dial number.
Sets a prefix dial number.
Sets a prefix dial number of up to five digits. This
number dials before any auto dial number is started. It
is useful for accessing the Private Automatic Branch
Exchange (PABX).
® ®
Xerox DocuCentre SC2020
User Guide
Tools
172