Changing The Paper Settings - Xerox DocuCentre SC2020 User Manual

5. Load paper with the side to copy or print on facing up. Align the leading edge of paper with the left
side of the tray.
Note: Do not load paper above the maximum fill line. It may cause paper jams or device malfunctions.
6. Push the tray in gently until it stops.
When pushing the tray in, do it slowly. If the tray is pushed with too much force, it may cause device
malfunctions.
Note: Affix the paper size label to the front of the tray.

Changing the Paper Settings

This section describes how to change the paper type setting for a tray.
A paper type is preset for Trays 1 and 2. Normally, [Plain] is set for the trays. To maintain the same print
quality after changing paper in a different quality in the same tray, you need to change the paper quality
setting for the tray that matches new paper loaded.
Notes:
• For more information, refer to
• For information on the paper size setting for Tray 5, refer to
1. Press the <Machine Status> button.
Supported Paper Type
<Machine Status> button
Services Home
Job Status
Machine Status
on page 58.
Tray 5 (Bypass) on page 206.
®
Xerox DocuCentre
User Guide
Loading Paper
® 66
SC2020