Changing The Paper Size For Trays 1 And 2 - Xerox DocuCentre SC2020 User Manual

Loading Paper

Changing the Paper Size for Trays 1 and 2

The following describes the procedure for changing paper size in Trays 1 and 2.
1. Pull out the tray until it stops.
While the device is copying or printing, do not pull out the tray that the job uses.
To prevent paper jams or loading errors, do not load different sizes or types of paper on top of any
remaining paper in a tray.
2. Remove any paper loaded in the tray.
3. For Tray 1, push down the metal plate.
4. While pinching the levers of the two paper guides, move them to the edges of paper.
65 ®
Xerox DocuCentre
User Guide
®
SC2020