Lighten/Darken - Xerox DocuCentre SC2020 User Manual

2. If you finish copying, select [Print Now].
Note: When you use the document feeder to copy both sides of a document, the printed position of
the front and back of the document may differ if the size in the document size setting and the size of
the document do not match. In this case, set [Original Size] to the same size as the document.

Lighten/Darken

To adjust the contrast to make the copy lighter or darker than the original.
1. Select the [Quality] tab, and then select [Lighten/Darken].
2. Select the desired level on the [Lighten/Darken] bar, and then select [OK].
You can select a contrast level from seven levels between [Darken] and [Lighten].
Selecting a cell on the left side of the bar makes the document contrast darker, and selecting a cell on the
right side of the bar makes the document contrast lighter.
Note: Bold values are the factory default menu settings.
Darken +3
Darken +2
Darken +1
Normal
Lighten +1
Lighten +2
Lighten +3
Works well with light documents or faint pencil markings.
Works well with normal typed or printed documents.
Works well with dark documents.
® ®
Xerox DocuCentre SC2020
User Guide
Copy
84