Select Tray - Xerox DocuCentre SC2020 User Manual

Select Tray

To select a tray.
1. Select [Select Tray] on the [Copy] tab.
2. Select the desired setting, and then select [OK].
Note: Bold values are the factory default menu settings.
Auto
Tray5 (Bypass)
Tray 1
Tray 2
Note: [Tray 2] is only available when the One Tray Module (Optional) is installed. When [Any] is
displayed as the paper size and type in Tray 5 (bypass), you can select the paper size and type from
this menu.
The paper is fed from an automatically selected tray.
The paper is fed from the Tray 5 (bypass).
The paper is fed from Tray 1.
The paper is fed from Tray 2.
® ®
Xerox DocuCentre SC2020
User Guide
Copy
80