Hardware And Software Requirements; Using Pms Integration Features - NEC 28i System Manual

Hardware and Software Requirements

PMS Integration Requires:
384i System Software with PMS Support
A third-party PMS System compatible with Nitsuko's 124i/384i
Property Management Interface Specification (002-069-**).
A DCI Port for connecting to the PMS System.
This can be a Super Display or 32-Button Display Telephone with
a DCI Module or a 3-DCI Module.
An LAPB PCB (P/N 92156).

Using PMS Integration Features

Enhanced DSS Operation ("Fast Check-in")
To use One-Touch Keys to speed up Check-in, Do Not Disturb,
Message Waiting, Room Call Restriction and Wake Up Calls:
1. Program One-Touch Keys for abbreviated access to Hotel/Motel
features.
For one-touch Check-in, set up a One-Touch Key with code
138. For example:
- Lift handset and dial 855.
- Press the One-Touch Key you want to program.
- Enter the key data (e.g., 138) and press HOLD.
- Enter the key's descriptive name and press HOLD.
2. Press EXT., MESSAGE, WAKE UP or STATUS on the DSS
Console to enable the mode corresponding to your one-touch
entry.
For one-touch Check-in, press STATUS.
3. Press a One-Touch Key for the Hotel feature you want to use.
For one-touch Check-in, press the key set up with code 138.
4. Press the room telephone's DSS key.
To check in room 319, press the DSS Console key for room
319. The DSS key for extension 319 will light steadily.
One-Touch Key Codes for Enhanced DSS Operation
You can store the codes in the table below under One-Touch Keys
for Enhanced DSS Operation.
One-Touch Key + DSS Mode Key + Option (if any) + Extension's DSS
For this feature
Do Not Disturb (Enable)
Do Not Disturb (Disable)
Message Waiting (Left)
Room Status (Check-in)
Room Status (Check-out)
Room Status (Maid Required)
Room Status (Maid in Room)
Abbreviated Operation
Key
Store this
Code
129
130
126
138
139
140
140
PMS Integration
And use this DSS
Console Mode Key
EXT. 1 or 2
EXT. 1 or 2
MESSAGE
STATUS
STATUS
STATUS + 2
STATUS + 3
2-15