Section 1: Installing The Cabinet; System Preparation And Configuration; Unpacking; Before Installing - NEC DS2000 Hardware Manual

Hide thumbs Also See for DS2000:

Table of Contents

System Preparation and Conﬁguration

Unpack the equipment and check it against your equipment lists. Inspect for physical damage. If you are not

sure about a component's function, review the Product Description Manual. Contact your Sales Representa-

tive if you have additional questions.

Have the appropriate tools for the job on hand, including: a test set, a punch down tool and a digital voltmeter.

Make sure you have a building plan showing the location of the common equipment, extensions, the telco

demarcation and earth ground. In addition, the installation site must meet the requirements outlined in the

Standard Practices Manual.

The common equipment is contained in the wall-mounted Main Equipment Cabinet. Choose a central location

for the cabinet that allows enough space for the equipment — and provides enough room for you to comfortably

work. Figure 1-1 4 Slot Cabinet Installation Layout on page 1-8 and Figure 1-2 8 Slot Cabinet Installation

Layout on page 1-9 show you about how much space your system requires.

DS2000 Hardware Manual

System Preparation and Conﬁguration

Section 1: Installing

the Cabinet

Section 1: Installing the Cabinet N 1-1

Table of Contents