Connecting The Printer To A Wireless Network Using The Embedded Web Server - Lexmark CS310 Series User Manual

Additional printer setup
In Windows 7 or earlier
a
Click or Start.
b
Click All Programs or Programs, and then select the printer program folder from the list.
c
Select your printer, and then navigate to:
Printer Home > Settings > Wireless Setup Utility
2
Follow the instructions on the computer screen.
Using the Wireless Setup Assistant (Macintosh only)
The Wireless Setup Assistant lets you:
•
Configure the printer to join an existing wireless network.
• Add a printer to an existing ad hoc network.
•
Change the wireless settings after installation.
•
Install the printer on additional network computers.
Installing the Wireless Setup Assistant
1
Go to the Lexmark Web site at http://support.lexmark.com.
2
Download the latest Wireless Setup Assistant application.
3
Double‑click the downloaded software installer package.
4
Follow the instructions on the computer screen.
Launching the Wireless Setup Assistant
Notes:
•
Make sure the printer is turned on.
•
Make sure a wireless network adapter installed in your printer is attached and working properly.
1
From the Finder, navigate to:
Applications > select your printer folder
2
Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.
Note: If you encounter problems while running the application, then click

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:
•
Your printer is connected temporarily to an Ethernet network.
• A wireless network adapter is installed in your printer and working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
1
Open a Web browser, and then type the printer IP address in the address field.
?
.
27