Parameter Selection - Danfoss VLT FC 302 Operating Instructions Manual

Programming

6.3.1 Parameter Selection

Parameters for the frequency converter are grouped into
various parameter groups for easy selection of the correct
parameters for optimised operation of the frequency
converter.
0-** Operation and display parameters for basic frequency
converter settings
1-** Load and motor parameters, includes all load and
motor related parameters
2-** Brake parameters
3-** References and ramping parameters, includes DigiPot
function
4-** Limits/Warnings, setting of limits and warning
parameters
5-** Digital inputs and outputs, includes relay controls
6-** Analog inputs and outputs
7-** Controllers, setting parameters for speed and process
controls
8-** Communication and option parameters, setting of FC
RS-485 and FC USB port parameters.
9-** Profibus parameters
10-** DeviceNet and CAN Fieldbus parameters
12-** Ethernet parameters
13-** Smart Logic Control parameters
14-** Special Function parameters
15-** Drive Information parameters
16-** Data Readout parameters
17-** Encoder option parameters
18-** Data Readouts 2
30-** Special Features
32-** MCO 305 basic parameters
MG37A202
Operating Instructions
33-** MCO 305 advanced parameters
34-** MCO data readout parameters
35-** Sensor Input Option
Danfoss A/S © Rev. 2014-07-29 All rights reserved.
6 6
73