Danfoss VLT FC 302 Operating Instructions Manual page 81

Programming
Par. No. # Parameter description
3-8* Other Ramps
3-80 Jog ramp time
3-81 Quick stop ramp time
3-82 Quick stop ramp type
3-83 Quick stop S-ramp ratio at decel. start
3-84 Quick stop S-ramp ratio at decel. end
3-9* Digital Pot.Meter
3-90 Step size
3-91 Ramp time
3-92 Power restore
3-93 Maximum limit
3-94 Minimum limit
3-95 Ramp delay
MG37A202
Operating Instructions
Default value 4-set-up
App.Dependent All set-ups
App.Dependent 2 set-ups
[0] Linear All set-ups
50 % All set-ups
50 % All set-ups
0.10 % All set-ups
1.00 s All set-ups
[0] Off All set-ups
100 % All set-ups
-100 % All set-ups
App.Dependent All set-ups
Danfoss A/S © Rev. 2014-07-29 All rights reserved.
FC 302 Change Conver-
only during sion
operation index
TRUE -2
TRUE -2
TRUE -
TRUE 0
TRUE 0
TRUE -2
TRUE -2
TRUE -
TRUE 0
TRUE 0
TRUE -3
Type
Uint32
Uint32
Uint8
Uint8
Uint8
Uint16
Uint32
Uint8
Int16
6 6
Int16
TimD
79