Parameter Selection - Danfoss FC 300 Operating Instruction

FC 300 Operating Instructions
Parameters for FC 300 are grouped into various
parameter groups for easy selection of the
1-xx Load and Motor parameters includes all load and motor related parameters
2-xx Brake parameters
3-xx References and ramping parameters includes DigiPot function
4-xx Limits Warnings; setting of limits and warning parameters
5-xx Digital inputs and outputs includes relay controls
6-xx Analog inputs and outputs
7-xx Controls; Setting parameters for speed and process controls
8-xx Communication and option parameters for setting of FC RS485 and FC USB port parameters.
9-xx Profibus parameters
10-xx DeviceNet and CAN Fieldbus parameters
13-xx Smart Logic Control parameters
14-xx Special function parameters
15-xx Drive information parameters
16-xx Read out parameters
17-xx Encoder Option parameters
32-xx MCO 305 Basic parameters
33-xx MCO 305 Advanced parameters
34-xx MCO Data Readout parameters
* default setting ( ) display text
40
How to Programme
correct parameters for optimized operation
of the frequency converter.
[ ] value for use in communication via serial communication port
MG.33.A7.02 - VLT is a registered Danfoss trademark