Data Collection Conditions; Each Scanning Cycle; Time Specification - Mitsubishi Electric FX5 User Manual

19.2

Data Collection Conditions

This section describes the timing when data is collected and the conditions under which data is collected.
Data collection conditions

Each scanning cycle

Time specification

Condition specification
Each scanning cycle
Collects data during the END processing of each scan.
Scan time
Program 0
processing
Precautions
When specifying each scanning cycle, make only one data logging setting.
Time specification
Lets the user specify the collection time interval.
The CPU module starts collecting data at the time of the following END process after the specified time has elapsed. Ensure
that the "Scan time" is less than "Time specification." If the scan time is longer than the specified time and the collection
interval or the collection timing occurs more than once during the same scan, data is collected only once during the END
processing. Data collection is performed on a scan by scan basis, which is the same operation as when "Each scanning
cycle" is used.
Ex.
When the time interval is set to 10 milliseconds
10 milliseconds
Set time
Program 0 END
END processing
1 scan
19 DATA LOGGING FUNCTION
130
19.2 Data Collection Conditions
Scan time
END 0 END
END
processing
Sampling
10 milliseconds
0 END
END processing
Description
Collects data during the END processing of each scan.
Collects data during the END processing after specified time interval.
Collects data when the monitored data meets the specified condition during the END processing.
Scan time
0 END
END END
processing
Sampling Sampling
0 END
END processing
Sampling
Scan time
0 END 0
END
processing
Sampling
10 milliseconds
0 END 0
END processing
Sampling
Scan time
END
END
processing
Sampling
END
END processing