• PWM in the same channel as an ongoing PWM execution cannot be executed by the alternate of the PWM/DPWM
instruction and HIOEN/DHIOEN instruction. However, the PWM operation that is already in execution continues.
• If a channel with invalid PWM output parameters is executed by HIOEN/DHIOEN instruction, the PWM output is not
• In a program with interruption priority 1, the HIOEN/DHIOEN or PWM/DPWM instruction to start or stop PWM output of the
high-speed pulse input/output module (CH5 to CH12) cannot be executed. (Page 64 Interrupt priority)
24 HIGH-SPEED INPUT/OUTPUT FUNCTION
24.7 PWM Function
Interrupt program is permitted.
The number of pulses to be output is set.
Y0 is reset before PWM is output.
Not necessary when Y0 is already OFF.
PWM output from CH1 starts by the rising
edge interrupt of X0.
Do not repeat execution of the I0 interrupt
program while pulses are being output.