Mitsubishi Electric FX5 User Manual page 31

■Bit data ON (TRUE)
When it is the turn of the corresponding program to be executed, the program is executed if the specified bit data is ON. This
eliminates the need for creating a program for monitoring triggers in a separate program. After the specified bit data changes
from ON (TRUE) to OFF (FALSE) and it is the turn of the corresponding event execution type program to be executed, output
(Y) currently used in the corresponding program and the current values of timer (T) can be cleared.
STOP/PAUSE→RUN
Execution order
Scan execution type program A
Scan execution type program B
Event execution type program C
(Executed when Y50 turns ON)
END processing
(1) The program is executed if Y50 is ON when it is the turn of event execution type program C to be executed.
Applicable devices are as follows.
Item
*1
Device
*1 Indexed devices cannot be specified.
1st scan 2nd scan
Y50 is the ON interval
M0
Y50 turns ON
Y50
Bit device
Bit specification in word device
3rd scan 4th scan
(1)
M0
Y50 turns OFF
Description
X (DX), Y, M, L, F, SM, B, SB
D, SD, W, SW, R, U\G
1.4 Execution Type of Program
Y50
1 PROGRAM EXECUTION
1
29