Executable file operations
File operations that can be executed on each file are explained below. This operation is possible only when the operation
status of the CPU module is the STOP status.
: Can be executed, : No corresponding operation
Device initial values
Global label setting file
Data logging setting file
Memory dump setting file
Firmware update prohibited file
*1 Operation on CPU Module Logging Configuration Tool.
All the file operation of the target memory unlike memory during data logging execution is possible.
*2 Only files stored on the SD memory card (drive No. 2) are the target.
*3 Writing is possible when the "Allow Online Change" is set to "Enable" with the FTP server settings.
*4 Available only when the CPU module operation status is STOP. A communication error occurs when operated in the RUN state.
3 CPU MODULE MEMORY CONFIGURATION
Operation with engineering tool
Operation with FTP server function