Boot Operation - Mitsubishi Electric FX5 User Manual

17.2

Boot Operation

At the time of power OFF→ON or reset of the CPU module, a file which is stored on the SD memory card is transferred to the
memory of the transfer destination which the CPU module judged automatically.
Boot operation procedure
The selectable files for boot operation are listed below.
1.
Carry out the boot file settings.
2.
Load SD memory card.
3.
Write the boot file settings and boot file to the SD memory card.
4.
Turn OFF→ON the power or reset the CPU module.
Specifiable file types
The procedure of boot operation is explained below.
• Parameter files (system parameters, CPU parameters, module parameters, module extension parameters)
• Remote password
• Global labels (global label setting files, initial label values)
• Program files (programs, restored information)
• FB files (FB, restored information)
• Device comments
• Initial device values
Configuring the boot setting
Carry out the settings required for the boot operation.
Navigation window  [Parameter]  [FX5UCPU]  [Memory Card Parameter]  [Boot Setting]
Operating procedure
"Boot Setting" window
"Boot File Setting" window
"Add Type" window
17 MEMORY CARD FUNCTION
124
17.2 Boot Operation
1.
Click "Detailed Setting" on the "Boot File Setting".
2.
Click the "Type" column. The maximum number of boot
files that can be specified is the same as the number of
files that can be stored in the storage memory.
3.
Select type for the boot file. (Multiple selection possible)