Software Installation; Figure 4-16: Dvi Connector - IEI Technology KINO-PVN-D5251 User Manual

Step 2: Align the DVI-I connector. Align the male DVI-I connector on the digital display
device cable with the female DVI-I connector on the external peripheral
interface.
Step 3: Insert the DVI-I
male connector, insert the male connector from the digital display device into the
female connector on the KINO-PVN-D5251/D4251. See Figure 4-16.

Figure 4-16: DVI Connector

Step 4: Secure the connector. Secure the DVI-I connector from the digital display
device to the external interface by tightening the two retention screws on either
side of the connector.

4.10 Software Installation

All the drivers for the KINO-PVN-D5251/D4251 are on the CD that came with the system.
To install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
Page 56
KINO-PVN-D5251/D4251/ Mini ITX SBC
connector. Once the connectors are properly aligned with the
Step 0: