Cisco Remote Phy Controller Profile And Rpd Configuration; Hardware Compatibility Matrix For Cisco Remote Phy Shelf 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Cisco Remote PHY Controller Profile and RPD
Configuration
This document describes how to configure the Cisco Remote PHY Controller Profile and RPD on the Cisco
cBR Series Converged Broadband Router.
Finding Feature Information
Your software release may not support all the features that are documented in this module. For the latest
feature information and caveats, see the release notes for your platform and software release. The Feature
Information Table at the end of this document provides information about the documented features and lists
the releases in which each feature is supported.
•
•
•
•
•
•
Hardware Compatibility Matrix for Cisco Remote PHY Shelf
7200
Note
Unless otherwise specified, the hardware components introduced in a given Cisco Remote PHY Shelf 7200
Software Release are supported in all subsequent releases.
Hardware Compatibility Matrix for Cisco Remote PHY Shelf 7200, on page 55
Controller Profile and RPD, on page 56
Configure Controller Profile and RPD, on page 58
Troubleshooting Tips, on page 65
Configuration Examples, on page 65
Feature Information for Controller Profile and RPD Configuration, on page 66
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
9
C H A P T E R
55