Cisco Integrated Management Controller Standalone I/O Throttle Count Configuration; References - Cisco UCS 2208XP Manual

Cisco Integrated Management Controller Standalone I/O Throttle Count Configuration

The I/O Throttle Count for standalone servers is configured in the Cisco Integrated Management Controller GUI .
To change the I/O Throttle Count parameter, log in to the CIMC, navigate to the Server tab, click the Summary link and then click
Power on Server . Once the server has been powered on, click the Inventory link, select the Cisco VIC Adapters tab, choose the
Adapter Card, and then select the vHBAs tab . Click fc0 or fc1, then click the Properties button . The vHBA Properties window
will display . Scroll down to the Fibre Channel Port section, configure the I/O Throttle Count field per the parameter values listed
above, then click the Save Changes button .

References

Virtual Interface Card Drivers Installation Guides
http://www .cisco .com/c/en/us/support/servers-unified-computing/ucs-manager/products-installation-guides-list .html
UCSM Managed and Standalone Compatibility Documents
http://www .cisco .com/en/US/products/ps10477/prod_technical_reference_list .html
Americas Headquarters
Cisco Systems, Inc.
San Jose, CA
URL: www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Cisco Systems (USA) Pte. Ltd.
Singapore
Europe Headquarters
Cisco Systems International BV Amsterdam,
The Netherlands
.
C07-730811-00 1/14