Attach Cisco Cisco Catalyst 8300 Series Edge Platforms On A Wall - Cisco Catalyst 8300 Series Hardware Installation Manual

Install and Connect
1 Rack Mounting
screws
Figure 27: Mid-Mount from Power Supply Side (C8300 2N2S-4T2X|6T)
1 Rack Mounting
screws

Attach Cisco Cisco Catalyst 8300 Series Edge Platforms on a Wall

Caution
Caution
Caution
Step 1 Attach the rack mount brackets to the sides of the device using only the hardware provided in the wall
mounting kit (#6-32 x 0.44 inch PHMS).
Only the C8300-1N1S-4T2X|6T are designed to be wall mounted. The C8300-2N2S-4T2X|6T have not
been designed to be wall mounted.
When mounted on a wall, the C8300-1N1S-4T2X|6T should always be oriented with a side of the device
oriented in the downward position. The I/O side and power supply side should be oriented so that the
fan vents and cable entry will be oriented to the left or right. The I/O side or power supply should never
be oriented downwards.
Your chassis installation must allow unrestricted airflow for chassis cooling.
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
Attach Cisco Cisco Catalyst 8300 Series Edge Platforms on a Wall
43