Defective Or Full Flash Service Check - Lexmark 7462 series Service Manual

Defective or full Flash service check

Action
Step 1
Check the flash memory card for damage, and replace if necessary.
Does the problem remain?
Step 2
Upgrade to a larger capacity flash memory card.
Does the problem remain?
Network software eror service check
Action
Upgrade the network firmware in the printer or print server.
Does the problem remain?
Network service check
Note: Before starting this service check, print out the network setup page. This page is found under
Menu > Reports > Network Settings. Consult the network administrator to verify that the physical and
wireless network settings displayed on the network settings page for the device are properly
configured. If a wireless network is used, then verify that the printer is in range of the host computer or
wireless access point, and there is no electronic interference. Have the network administrator verify that
the device is using the correct SSID, and wireless security protocols. For more network troubleshooting
information, consult the Lexmark Network Setup Guide.
Actions
Step 1
If the device is physically connected to the network, make sure that
the Ethernet cable is properly connected on both ends.
Does the problem remain?
Step 2
Make sure that the printer status under Printers and Faxes on the
host computer is set to online. Delete all print jobs in the print
queue.
Does the problem remain?
Diagnostic information
208
Yes No
Go to step 2. Problem is solved.
Contact next level of Problem is solved.
support.
Yes No
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
7462