Lexmark 7462 series Service Manual page 64

200 error messages
Error code Description
200.00 Sensor (input) area jam
The media is jammed in the sensor (input) area.
200.01 Sensor (input) lingering jam (MPF, duplex, or
envelope feeder)
The media reached the sensor (input) but did not
clear it within the specified time.
200.02 Sensor (input) lingering jam
The media reached the sensor (input) but did not
clear it within the specified time.
200.04 Sensor (input) early jam
The media reached the sensor (input) sooner than
the specified time. Wrong config ID causes engine
to assume 500 paper path on 250 model.
200.06 Sensor (input) early jam
The sensor (input) rebounded once the trailing
edge of the media passed.
200.07 Sensor (input) late area jam (input option tray)
The media is late reaching the sensor (input)
within the specified time.
200.08 Sensor (input) early jam
The media reaches the sensor (input) sooner than
the specified time.
200.09 Printhead laser start failure
The printhead laser start process failed because
it did not receive proper feedback signal from the
printhead motor.
200.10 Printhead motor synchronization error
The printhead motor is not synchronized when
media reaches the sensor (input).
200.11 Printhead polygon mirror synchronization error
The printhead polygon mirror motor becomes
unsynchronized when the media reaches the
sensor (input).
200.12 Laser power signal error
The printhead laser power signal has failed.
200.13 Sensor (input) static jam
Media remains on the sensor (input) during the
warm up sequence.
200.14 Sensor (input) early jam
The media reaches the sensor (input) sooner than
the specified time.
Action
Go to "Sensor (input) service check" on
page 70.
Go to "Sensor (input) lingering jam service
check" on page
Go to "Sensor (input) early jam service check"
on page
Go to "Sensor (input) service check" on
page 70.
Go to "Sensor (input) late jam service check"
on page
Go to "Sensor (input) early jam service check"
on page
Go to "Printhead laser start failure service
check" on page
Go to "Sensor (input) static jam service check"
on page
Go to "Sensor (input) early jam service check"
on page
Diagnostic information
64
70.
72.
73.
72.
77.
77.
72.
7462