Fax Failed; Fax Memory Full; Fax Partition Inoperative. Contact System Administrator; Fax Server 'To Format' Not Set Up. Contact System Administrator - Lexmark 7462 series Service Manual

Touch Continue to clear the message.

Fax failed

The fax failed to be sent. Wait for the message to clear.

Fax memory full

There is not enough memory to send the fax job.
Touch Continue to clear the message.

Fax partition inoperative. Contact system administrator.

The fax partition appears to be corrupted. Try one or more of the following:
•
Touch Continue to clear the message.
•
Turn the printer off and then back on to reset the printer. If the message appears again, then contact
your system support person.

Fax server 'To Format' not set up. Contact system administrator.

The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Fax Server setup. If the message appears again, contact your system support person.

Fax Station Name not set up

The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured
properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Fax Station Number not set up

The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured
properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Flushing buffer

Wait for the message to clear.
Diagnostic information
186
7462