Sensor (High Capacity Stacker Pass Through) Removal - Lexmark 7462 series Service Manual

3
Unsnap each side of the deflector gate and remove.

Sensor (high capacity stacker pass through) removal

1
Remove the rear door assembly. Go to
434.
2
Using needle-nose pliers or your finger, pull out and downward on the sensor (pass through) until the sensor
unsnaps.
3
Remove the high capacity controller card cover panel. Go to
panel removal" on page
"High capacity stacker rear door assembly removal" on page
437.
Repair information
444
"High capacity stacker controller card cover
7462