Sensor (Offset Stacker Finisher Media Bin Present) Removal - Lexmark 7462 series Service Manual

4
Remove the LED sensor cover.
Sensor (offset stacker finisher media bin present) removal
1
Remove the offset stacker LED sensor cover. Go to
page 452.
2
Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3
Remove the harness connected to the sensor (offset stacker finisher media bin present).
4
Remove the offset stacker sensor (offset stacker finisher media bin present).
"Offset stacker LED sensor cover removal" on
Repair information
453
7462