Flash Full Service Check; Maintenance Kit Service Check; Imaging Unit Low Service Check - Lexmark MS510 Service Manual

Flash full service check

Action
Step 1
Format the flash memory. Navigate to Settings > Print
Settings > Utilities, then select Format Flash.
Does the error remain?
Step 2
Remove the installed memory, and then POR the machine.
Does the error remain?
Step 3
Replace the controller board. See
page 200.
Does the error remain?

Maintenance kit service check

Action
Replace the maintenance kit and reset the Maintenance counter.
Does the error remain?

Imaging unit low service check

Action
Step 1
Replace the imaging unit.
Does the problem remain?
Step 2
a
Make sure the imaging unit smart chip contact cable is properly
connected to the controller board.
b
Make sure the contacts are free of debris.
Does the problem remain?
Step 3
Check the contacts for damaged pins.
Are they free of damage?
"Controller board removals" on
Diagnostic information
92
Yes No
Go to step 2. The problem is solved.
Go to step 3. Replace the memory
card.
Contact the next level The problem is solved.
of support.
Yes No
Contact the next level The problem is solved.
of support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.
Contact the next level Replace the printer.
of support.
4514-6xx