Fuser Drive Release Linkage Removal - Lexmark 7462 series Service Manual

Fuser drive release linkage removal

1
Remove the system card assembly. Go to
2
Gently unsnap the upper end of the fuser drive release linkage from the machine.
3
Rotate the fuser drive release linkage 90° to release the lower end of the fuser drive release linkage from
the machine.
4
Remove the fuser drive release linkage.
HVPS card assembly removal
1
Remove the right side cover. Go to
page 332 or "Right side cover removal (model X658)" on page
2
Remove the four screws (A) securing the HVPS card assembly to the machine.
3
Remove the HVPS card assembly.
"System card assembly removal" on page 321
"Right side cover removal (models X651, X652, X654, and X656)" on
Repair information
324
331.
7462