Flash Memory Failure Service Check; Insufficient Flash Memory Service Check - Lexmark CS720 Service Manual

Flash memory failure service check

Action
Step 1
Navigate to Settings > Print settings > Job Accounting Menu
Settings > Log Near Full Level. Make sure that the value is set to
maximum.
Does the problem remain?
Step 2
If applicable, make sure that the optional memory card is
supported.
Does the problem remain?
Step 3
Check the controller board pins for damage, and replace if
necessary. See "Controller board removal" on page
Does the problem remain?
Step 4
Make sure that the firmware version is the latest, and update if
necessary.
Does the problem remain?
Insufficient flash memory service check
Action
Step 1
Navigate to Settings > Print settings > Utilities Menu > Format
Flash > Yes.
Does the problem remain?
Step 2
Navigate to Settings > Print > Job Accounting > Log Near Full
Level. Make sure that the value is set to maximum.
Does the problem remain?
Step 3
If applicable, make sure that the optional memory card is
supported.
Does the problem remain?
357.
Diagnostic information
162
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
5028