Lexmark 7462 series Service Manual page 141

Error code Description
271.53 The media is late reaching the sensor (mailbox
empty) within the specified time.
27y.54 The media reached the sensor (output pass
through) but did not clear it in the specified time.
Note: This only applies to mailbox.
27y.55 The media reached the sensor (mailbox empty) but
did not clear it in the specified time.
27y.58 The media is late reaching the sensor (output pass
through) within the specified time.
This applies to:
•
High capacity stacker
•
Mailbox
•
Offset stacker
•
Output expander
Sensor (output pass through) lingering jam service check
Action
Step 1
Make sure that the output option is properly installed.
Does the problem remain?
Step 2
Make sure that the media path between the base machine and the
output option is free from any obstructions.
Does the problem remain?
Step 3
Check the sensor (stapler pass through) for proper operation.
a
Enter the Diagnostics menu, and then navigate to:
Output bin tests > Sensor test > Output bin [x]
b
Observe the line item, "passthru."
Does the display on the operator panel change every time the
sensing area of the sensor is interrupted or blocked?
Step 4
a
Check the sensor (output pass through) for proper connection.
b
Replace the connection, if necessary.
Does the problem remain?
Action
Go to
check" on page
Go to
jam service check" on page
Go to
service check" on page
Go to
service check" on page
Diagnostic information
141
"Sensor (mailbox empty) late jam service
144.
"Sensor (output pass through) lingering
141.
"Sensor (mailbox empty) lingering jam
145.
"Sensor (output pass through) late jam
142.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Go to step 6. Go to step 4.
Go to step 5. The problem is
solved.
7462