Bin Mailbox Assembly Sensor (Pass Through) Removal - Lexmark 7462 series Service Manual

4-bin mailbox assembly sensor (pass through) removal

Note: The sensor (pass through) is the lower rear sensor. The rear upper sensor is the sensor (mailbox
empty).
1
Open the rear door.
2
Life the deflector gate above the sensor (pass through) and using a flat‑blade screwdriver, release the tabs
securing the sensor (pass through) to the 4‑bin mailbox assembly.
3
Remove the 4‑bin mailbox assembly left cover. Go to
page 386.
"4-bin mailbox assembly left cover removal" on
Repair information
397
7462