Lexmark 7462 series Service Manual page 72

Action
Step 10
Remove obstructions in the aligner assembly.
Does the problem remain?
Step 11
Perform a print test.
Does the problem remain?
Sensor (input) early jam service check
Action
Step 1
Fan the media, ensure the media is properly installed, and check
the paper path for obstructions.
Does the problem remain?
Step 2
Make sure that media originated from the MPF.
Step 3
Clean or replace the MPF pick roll assembly. See
assembly removal" on page
Does the problem remain?
Step 4
Perform a MPF print test and check the MPF pick solenoid for
proper operation. If necessary, replace the MPF pick solenoid. See
"MPF pick solenoid assembly removal" on page
Does the problem remain?
Step 5
Check the MPF lift plate assembly for damage. If necessary,
replace the MPF lift plate assembly. See
removal" on page 338.
Does the problem remain?
Step 6
Remove and properly reinstall the media.
Does the problem remain?
"MPF pick roll
339.
313.
"MPF lift plate assembly
Diagnostic information
72
Yes No
Go to step 11. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Go to step 4. Problem is solved.
Go to step 5. Problem is solved.
Go to step 6. Problem is solved.
Go to step 7. Problem is solved.
7462