Lexmark 7462 series Service Manual page 223

X65x series
Hide thumbs Also See for 7462 series:
Table of Contents

Advertisement

922.xx error messages
Error code Description
922.00
Fuser hot roll failed to reach target departure.
922.02
The fuser hot roll does not reach the "beginning
lamp detection" parameter in the specified time.
922.03
The fuser hot roll does not reach the "final lamp
detection" parameter, but not in the specified time.
922.04
The fuser hot roll has timed out and not reached
the "final lamp detection" parameter during the
specified time.
922.05
After hot roll lamp detection, did not roll over to
steady state control in time.
The control code has gotten lost.
922.06
The fuser hot roll did not reach operating
temperature within new enhanced control.
922.07
The fuser hot roll did not reach operating
temperature after increasing interpage gap.
922.25
Fuser hot roll failed to reach target departure.
922.27
The fuser hot roll does not reach the "beginning
lamp detection" parameter in the specified time.
922.28
The fuser hot roll does not reach the "final lamp
detection" parameter, but not in the specified time.
922.29
The fuser hot roll has timed out and not reached
the "final lamp detection" parameter during the
specified time.
922.30
After hot roll lamp detection, did not roll over to
steady state control in time.
The control code has gotten lost.
922.31
The fuser hot roll did not reach operating
temperature within new enhanced control.
922.32
The fuser hot roll did not reach operating
temperature after increasing interpage gap.
Action
Go to
check" on page
Go to
922.07) failure service check" on page
Go to
check" on page
Go to
922.07) failure service check" on page
Go to
check" on page
Go to
failure service check" on page
Go to
check" on page 242
Go to
failure service check" on page
Diagnostic information
223
"Fuser (922.00, 922.25) failure service
245.
"Fuser (922.02–922.04 and 922.06–
"Fuser hot roll control code service
242.
"Fuser (922.02–922.04 and 922.06–
"Fuser (922.00, 922.25) failure service
245.
"Fuser (922.27–922.29, 922.31–922.32)
"Fuser hot roll control code service
"Fuser (922.27–922.29, 922.31–922.32)
7462
245.
245.
246.
246.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents