5
Look closely at the top edge of the media to see if the sheets are aligned.
Print skew correction procedure
1
Check the paper squareness.
2
Make sure that the guides in the paper tray are properly aligned.
3
Check the base printer skew and registration.
4
Plug the printer into the power source, and then power on in Diagnostics Mode (hold down 3 and 6 during
POR).
The two pages do not align perfectly at the top or sides.
Media Not square:
DO NOT
Repair information
299
Square Media: Top and sides
are perfectly aligned
use for ADF skew rework.
7462