Lexmark 7462 series Service Manual page 160

Right tamper does not leave home position failure (StapleSmart finisher) service check
Action
Step 1
Check all the connections on the output option controller card.
Does the problem remain?
Step 2
Check the tamper drive belt for damage, and if necessary, replace
the belt.
Does the problem remain?
Step 3
Replace the right tamper motor assembly. Go to
assembly tamper drive motor assembly removal" on page
Does the problem remain?
Step 4
Replace the sensor (tamper HP). Go to
assembly tamper HP left and right) removal" on page
Does the problem remain?
Step 5
Replace the output option.
Does the problem remain?
Paddle home position jam service check
Action
Step 1
Check all the connections on the StapleSmart finisher controller
card.
Does the problem remain?
Step 2
Check the sensor (paddle HP) for damage, and if necessary,
replace the sensor. Go to
HP) removal" on page
Does the problem remain?
Step 3
Replace the output option.
Does the problem remain?
"Sensor (MFP stapler
"Sensor (MFP stapler assembly paddle
497.
Diagnostic information
Yes
Go to step 2.
Go to step 3.
Go to step 4.
"MFP stapler
492.
Go to step 5.
498.
Contact the next
level of support.
Yes
Go to step 2.
Go to step 3.
Contact the next
level of support.
160
7462
No
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
The problem is
solved.
The problem is
solved.
The problem is
solved.