Adf Duplex Ccd Assembly Removal (Models X654, X656, And X658) - Lexmark 7462 series Service Manual

4
Pull up and release the two snaps (B) securing the ADF duplex CCD scan glass assembly.
5
Remove the ADF duplex CCD scan glass assembly.

ADF duplex CCD assembly removal (models X654, X656, and X658)

CAUTION—POTENTIAL INJURY: When you see this symbol, there is a danger from hazardous voltage
in the area of the product where you are working. Unplug the product before you begin, or use caution if
the product must receive power in order to perform the task.
1
Remove the ADF duplex CCD scan glass assembly. Go to
(models X654, X656, and X658)" on page
2
Disconnect the CCD harness from the top of the ADF unit assembly.
3
Remove the skew adjustment locking screw (A), the skew adjustment screw (B), and the spring.
4
Remove the two screws (C) securing the paper guide and remove.
B
A
"ADF duplex CCD scan glass assembly removal
542.
Repair information
543
7462
A
B