May 19, 2016
•
Updated the 250‑ and 550‑sheet tray assemblies (Assemblies 15 and 17) to remove the following parts that
are not anymore FRUs:
–
Tray front cover
–
Tray right cover
–
Tray left cover
January 8, 2016
•
Changed the part number of the input sensor from 40X4368 to 40X8673.
October 20, 2015
•
Created this new intervention‑required message,
•
Updated
"User attendance messages (0‑99)" on page 202
Maintenance.
•
Created
"Replace fuser service check" on page
•
Updated
"Individual maintenance part expected life" on page 567
charge roll assembly with tool from 40X5852 to 40X0127.
August 21, 2015
•
Updated all fuser‑related service check topics for 201 and 202 error messages in the Diagnostic information
chapter.
January 27, 2015
•
Updated the Solid black service check in the Diagnostic information chapter.
January 9, 2015
•
Remove the 202.30 error code entry from the Error code table in the Diagnostic information chapter.
December 5, 2014
•
Parts catalog Assembly 17—Replaced part number 40X4469 with 40X5786.
October 30, 2014
•
Updated the graphic in the Assembly 5 parts catalog in the Pars catalog chapter.
•
Replaced part number 40X4417 with 41X4417 in the Assembly 1 parts catalog in the Parts catalog chapter.
September 29, 2014
•
Updated Assembly 5 parts catalog art in the Parts catalog chapter.
June 2, 2014
•
Added staple cartridge holder (40X7466) to parts catalog Assembly 20.
May 2, 2014
•
Changed all references to J15‑3 to J20‑4 in the possible repair action for "917.00" error code in the 9yy error
code table.
"81 Routine Maintenance" on page
to include an entry for 81 Routine
214.
to change the part number for the
Preface
28
7462
200.