Horizontal White Stripes Or Bands (Side To Side Direction) - Lexmark T65 Series Product Study Manual

Lexmark T65x and X65x Mono Product Study Guide

Horizontal white stripes or bands (side to side direction)

CHECK THE MEDIA CONDITION
Load new, dry, recommended media and re-print the defective image.
CHECK THE MEDIA TRANSFER ROUTE (PAPER PATH)
Make certain it is free of debris or contamination.
CHECK THE TONER LEVEL. THE TONER MAY BE LOW.
•
TIP: A toner cartridge that has been used in the machine long enough to be nearing the end of
life, may be gently shaken from side to side in order to level out any unevenness in the toner
reservoir that may have developed because of certain usage patterns or applications. As an
interim measure, this may allow the cartridge to be used a little longer.
CHECK THAT THE TRANSFER ROLL ASSEMBLY IS FREE OF EXCESS WEAR & CONTAMINATION.
CHECK THE PRINTHEAD ASSEMBLY FOR PROPER CONNECTIONS
Reseat the connections properly.
If the component seems to be connected correctly, replace the printhead assembly.
CHECK THE SYSTEM CARD FOR PROPER CONNECTIONS
Reseat the connections properly.
If the component seems to be connected correctly, replace the system card.
For Training Purposes Only 38
Rev 1.47
6/3/2009